The direct replacement for your 2003 Fleetwood Bounder Motorhome gear motor assembly is the Replacement Gear Motor Assembly for Lippert Electric Slide-Out Item # LC386327.
I've attached a video that offers additional information about this part for you as well. view full answer...
We have exactly what you need for your 2016 Fleetwood Bounder 35K - the front anti-sway bar, rear anti-sway bar, rear SumoSprings and front SumoSprings. I'll list exactly what you need for your motorhome:
- SumoSprings Maxim Custom Helper Springs - Rear Axle # SSR-187-54-1
- SumoSprings Rebel Custom Helper Springs - Front Axle # SSF-170-40-2
- Roadmaster Exact Center Steering Stabilizer # RM42RR
- Roadmaster Front Anti-Sway Bar # RM-1139-148
- Roadmaster Rear Anti-Sway Bar # RM-1139-149
In... view full answer...
The Replacement PowerGear RV Above Floor Slide-Out Motor part # LC368417 is the correct replacement for a Power Gear 523900. There isn't a similar alternate part number that would work. view full answer...
To tow a 2012 Jeep Wrangler behind your 2019 Fleetwood Bounder you'll need the following components:
Baseplate: Blue Ox Base Plate Kit # BX1126. This baseplate is designed for a factory bumper, if you have a specialty or aftermarket then I'll need to know what it is to find the correct fitting baseplate.
Tow Bar: Blue Ox Alpha 2 Non-Binding Tow Bar # BX7380. This tow bar comes with safety cables included so you won't need to purchase them separately.
Tow Bar Wiring: I see you were... view full answer...
For your Lippert Level Up Hydraulic Leveling System, you can use the:
-Replacement Foot Pad for Lippert Hydraulic Ground Control Leveling System # LC324269.
These replacement feet are 9" in diameter, and also includes the o-rings, the bolt, and washers.
Additionally, since you mentioned that your foot pads had become bent from use on soft surfaces I recommend also getting a set of snap pads:
-SnapPad XTRA Jack Pads for Lippert Leveling Systems w/ 9" Round Jack Feet # SP54FR4.
These... view full answer...
From what I can find online it appears the tire size of your 2016 Fleetwood Bounder is 255/80r22.5. This will give you a 38.6 inch diameter and 10 inch width. For your tire covers, I recommend the Covercraft SnapRing TireSavers Tire Covers # ST7004BK or # ST7004WH. These covers will protect your tires from UV rays, dirt, acid rain, and animals. They are a washable material and can be easily cleaned. They have a heavy-duty flannel backing. The SnapRing is an internal ring that slides... view full answer...
There isn't a "direct" replacement for the Atwood GC10A-3E RV water heater but we do still have an option for you with the Furrion RV Tankless Water Heater # FR98SR. Motorhome's typically have a special door for their water heater that matches the color of the motorhome, which usually can't be used with another model water heater because of how they mount. If the door has its own mounting flange then you might be able to get away with pulling it off and reinstalling it with the # FR93FR,... view full answer...
As long as you have good enough access to the jack legs you can leave them installed on your trailer when swapping the springs part # LC359434. I'd recommend putting something under the foot when the spring is off.
The top bolt that Conner referred to is the one at the top of the spring and not at the top of the jack. view full answer...
The Valterra Flexible Tank Wand for RV Black-Water Tank # A01-0187VP was designed to just drop right into the black tank so you will most likely not be able to use it to get through your vacuum style system. Trying to run it through the toilet and then through the vacuum would be quite challenging. The only way it would work is if you had another access hole to the tank or if you ran it up through the dump tube opening of the tank. This way would be quite messy but would give you more of... view full answer...
If your 7-way has a round connector at the back that you could remove you could use the part # C55774 as a replacement for it and you'd have a 4-way separately that you could use for your magnetic lights. Or if you have a 7-way that does not have a connector behind it you could hardwire in one with the # 18252. view full answer...
The correct SumoSprings for the front axle of your 2006 Fleetwood Bounder 32W is the kit part # SSF-171-40-2 and then for the rear # SSR-187-54-1. I attached install and review video links to this page for these for you to check out as well. view full answer...
Most likely yes, but I wasn't able to pull up a clear enough shot of the rear of our 99 Fleetwood Bounder 34J to know for sure if the replacement taillight part # 30-86-712 would work for or not. The light this lens fits measures 5-3/4" Long x 4-3/8" wide x 2-3/16" like part # 30-86-203. You can send me a close up picture of your current taillights or you can compare measurements to know for sure.
I attached a review video for the light this lens fits for you to check out as well. view full answer...
If the bump stops on your 2006 Fleetwood Bounder Class A Motorhome are going to interfere with the bags, or are directly in the spots where you're going to be mounting your Firestone Ride-Rite # F2070, they can be removed. With that being said, if they're not going to interfere with installation, you can leave them there to act as a fail-safe in the event that a bag were to rupture or some other type of freak malfunction (this is unlikely, but if they're not hurting anything you don't need... view full answer...
Although it's not from Petersen Manufacturing like the # 108-15A lens you'd looked at, Optronics makes an LED equivalent that we offer as part # MCL31AB for an amber lens or # MCL31RB for a red lens. Either lamp mounts on 3 inch centers, and is the same 4 x 2 size as the Petersen equivalents.
You can see a video showing a typical installation by clicking the provided link. view full answer...
The 2020 Fleetwood Bounder 35K is on a Ford F-53 Chassis and the correct stabilizer is the Roadmaster Exact Center Steering Stabilizer # RM42RR.
You made a nice choice as the stabilizer will provide dramatic improvements to the motorhome's steering. It comes with everything needed for installation (except for tools). view full answer...
The 225/75R15 diameter is normally right at 28 inches in diameter. So for a white spare tire cover in this size you'd want the part # 052963751406 which is same style as cover you mentioned but the right size.
I attached a review video for this for you to check out as well. view full answer...
Your 2007 Fleetwood Bounder Motorhome is on a Ford F-53 chassis therefore I recommend using the Air Lift LoadLifter 5000 Air Helper Springs part # AL57140 for the front and part # AL57410 for the rear. The airbags are going to do an excellent job of reducing strain on your suspension, improving ride quality, and increasing overall stability. If you need an air compressor then I recommend the Air Lift WirelessAIR Compressor System for Air Helper Springs part # AL74000.
In regards to the... view full answer...
Your 2014 Fleetwood Bounder should be on a Ford F-53 chassis. If you found the gray plug next to the brake release (see attached photo) then this means that you should just be able to use a plug-in adapter to easily install your brake controller.
Out of all of our brake controllers I recommend going with the Tekonsha Prodigy P3 # 90195. This is a proportional brake controller that will apply the brakes on your trailer or hauler at the same time and with the same intensity as the brakes... view full answer...
The Replacement Vacuum Pump for Dometic VacuFlush RV Toilet - 12V # DOM33FR comes with everything that is pictured in the photos on the product page. I do believe you're referring to one of the connections for the pump that is threaded (shown in attached photo), which is included. view full answer...
The Solera 18V Power RV Awning # LC730523 is rechargeable, and includes a 110V charger kit . The battery is able to run 22-25 times before needing to charged again. Unfortunately adding an LED light is not possible with this awning. Adding an LED kit is based on the awning fabric.
To add an LED light you'd need to upgrade your awning arms with a conversion kit like the Solera Smart Arm 12V Power RV Awning Conversion Kit # LC759516. From here, you can add an LED light # LC674282. view full answer...
Go To Results